NDT AND INDUSTRIAL INSPECTION

Weld testing after repair

After repair, the work performed must be linked to the area actually examined. WELLDIUM INSPECTION CND reviews the repair dossier to establish the areas, testing methods and required criteria. The objective is to provide traceable NDT findings for the next stage of your acceptance process.

Stock illustration — industrial environment.
Stock illustration — industrial environment.

Start with the repair dossier

Preparation starts with weld identification, repair location and previous findings where available. A clear description of the work helps establish the examination area and avoid confusion with adjacent assemblies.

The party specifying the repair should provide the applicable framework: code, client specification or inspection plan. The NDT service does not itself establish the repair design.

  • Initial report and indication locations where available.
  • Sketch of the removed or repaired area and completed repair weld.
  • Material, dimensions and specific dossier requirements.

Place the examination at the correct stage

The specification may require examination at one or more stages. State whether the request concerns a prepared area before rewelding, the completed weld or an examination following another operation.

Any treatments, required waiting periods and final surface preparation must be confirmed before mobilisation. Testing performed early in the sequence is not necessarily the specified final examination.

  • Identify the expected work stage at the time of the visit.
  • Flag treatments, additional repair work or coatings still planned.
  • Specify when the report is required.

Match the method to the discontinuity sought

Visual examination can document accessible features of the repaired area. Surface testing or volumetric examination may then be required by the specification. Their purpose and coverage are not interchangeable.

Material, geometry, access and applicable criteria inform selection. ISO 17635:2025 provides a framework for choosing NDT of metallic welds; it does not impose the same programme on every repair.

  • Consider PT or MT according to the objective and material compatibility.
  • Assess UT or RT where volumetric examination is required and feasible.
  • Define the repaired area and any additional coverage specified in the dossier.

Complete the re-examination with clear traceability

The report should identify the examined area, method, examination conditions, indications and conclusion against agreed criteria. Where several repairs have been made, the relevant dossier revisions must remain identifiable.

An NDT conclusion applies to the examination performed. It is not, by itself, authorization to return equipment to service, approval of repair design or completion of all equipment regulatory obligations.

  • Link the examination to the weld reference and repair revision.
  • Distinguish acceptable results, unexamined areas and further investigation.
  • Deliver the agreed records to the representative responsible for the dossier.

Methods to consider for your specification

VT

For visible preparation or weld characteristics at the specified work stage.

It does not address internal discontinuities that cannot be observed.

PT

For surface-breaking discontinuities in a compatible surface.

Products, preparation and criteria must be confirmed for the material.

MT

For surface or near-surface examination of ferromagnetic material.

Not suitable for every alloy; magnetization must suit the application.

UT

Where volumetric examination is specified and the configuration is suitable.

Technique, coverage and criteria must be defined for the weld involved.

RT

Where radiography is specified and feasible for the repaired area.

Resources, authorizations, competence and radiation protection conditions need prior confirmation.

Information needed for your quotation

  • Weld reference and precise repair location.
  • Initial report, repair plan and previous repair history.
  • Grade, thickness, diameter and joint geometry.
  • Work stage, treatments and planned preparation.
  • Specified method, coverage, criteria and standard edition.
  • Access, requested date, recipient and re-examination deliverables.

Explore the methods

LET’S DISCUSS YOUR PROJECT

Your next inspection starts here.

An equipment item. A location. A deadline. Tell us what you need.

Request a quote