
Principle
Magnetizing a component allows magnetic particles to reveal some field disturbances associated with discontinuities. Magnetization directions and viewing conditions are selected for the examination.
Applications
- Weld testing on ferromagnetic steel.
- Examination of mechanical components during manufacture.
- Checking areas of concern during maintenance.
- Testing after repair in accordance with the inspection specification.
Equipment
- Welds and adjacent areas
- Ferromagnetic mechanical components
- Compatible metallic structures and assemblies
Discontinuities sought
- Surface cracks
- Surface-breaking discontinuities
- Some near-surface discontinuities
Technical limitations
- The material must be ferromagnetic.
- Discontinuity depth and orientation affect detection.
- Surface condition and magnetization must be controlled.
Standards and acceptance criteria
ISO 17638:2016 addresses the method for ferromagnetic welds. ISO 23278:2015 addresses acceptance levels for ferromagnetic steel welds. Unwelded components may require a different inspection specification.
An indicative workflow
Confirm suitability
Establish material grade, geometry, examination areas and required criteria.
Prepare the examination
Agree access, surface preparation and any operations required after testing.
Examine the agreed areas
Follow the defined process and record relevant indications.
Assess and report
Compare results against applicable criteria and identify areas requiring additional work or examination.
Documentation
- MT report identifying the method and examined areas.
- Location and description of recorded indications.
- Records and photographs specified for the job, plus traceability of any requested examination after repair.
Frequently asked questions
Is MT suitable for aluminium?
No. Aluminium is not ferromagnetic. Another method must be selected for the discontinuities of interest.
Can all stainless steels be tested by MT?
No. The grade and magnetic behaviour must be established before selecting the method.
What helps prepare the quotation?
The material grade, drawing, component or weld quantities, any coating, site location and requested schedule.