
Principle
A penetrant enters open discontinuities in a prepared surface. Excess penetrant is removed and a developer draws out retained liquid, producing indications viewed under conditions suitable for the selected system.
Applications
- Weld examination after manufacture.
- Checking repaired areas before subsequent operations.
- Workshop or site inspection where access and conditions allow.
- Examination of welds in steam systems, industrial piping and fabricated equipment.
Equipment
- Pipework and branch connections
- Vessels and welded fabrications
- Compatible machined, cast or forged metal components
Discontinuities sought
- Surface-breaking cracks
- Open porosity
- Laps and other discontinuities accessible to the penetrant
Technical limitations
- PT does not reveal discontinuities wholly below the surface.
- Paint, contamination or blocked openings can compromise the examination.
- Chemical compatibility, porosity and temperature affect process selection.
Standards and acceptance criteria
ISO 3452-1:2021 addresses the testing process. ISO 23277:2015 provides acceptance levels for certain metallic welds. Applicability and the required level must be established in the inspection specification.
An indicative workflow
Define the requirement
Provide material, weld identification, drawings, quantities and inspection requirements. Flag any planned treatment or coating.
Prepare the inspection
Agree surface preparation, access and site conditions. Define examination coverage and how indications will be assessed.
Examine and record
Follow the specified process, identify indications and record the conditions needed to interpret the results.
Report the findings
Document examined areas, any limitations and the conclusion against the agreed criteria.
Documentation
- Inspection report identifying components and examined areas.
- Indication records and location sketches, as specified.
- Authorized photographs and results of examination after repair, where included in the quotation.
Frequently asked questions
Can PT be used on stainless steel?
It can be suitable for compatible stainless steels. Grade, preparation and cleanliness requirements inform the choice of products and process.
Does an indication mean that the component fails?
No. Its type and dimensions must be assessed against the agreed acceptance criteria.
What information is needed for a quotation?
Material, dimensions or weld quantities, location, requested date, access and inspection requirements. A marked drawing helps define the scope.
Inspection scope and traceability
Discuss an inspection requirement