NDT AND INDUSTRIAL INSPECTION

Industrial radiography — RT

WELLDIUM INSPECTION CND reviews radiographic testing requests for piping and fabricated assemblies. Technical feasibility and radiation protection requirements are assessed before an inspection commitment is made.

Stock illustration — industrial environment.
Stock illustration — industrial environment.

Principle

X-rays or gamma rays pass through the component. Differences in attenuation produce an image on a suitable detector. Image evaluation can reveal discontinuities within the penetrated volume.

Applications

  • Examination of pipe welds.
  • Testing metallic assemblies during manufacture.
  • Examination of repaired areas under the applicable specification.
  • Specific requirements in metal fabrication and industrial construction.

Equipment

  • Pipe and plate welds
  • Fabricated assemblies
  • Metallic equipment with a configuration suitable for examination

Discontinuities sought

  • Porosity and inclusions producing sufficient contrast
  • Detectable material discontinuities within the selected configuration
  • Some planar discontinuities, depending on orientation and technique

Technical limitations

  • Thickness, geometry and discontinuity orientation affect the result.
  • A radiograph is a projection and does not alone describe the full geometry of an indication.
  • Ionizing radiation and simultaneous site activities require appropriate controls.

Standards and acceptance criteria

ISO 17636-1:2022 addresses film techniques and ISO 17636-2:2022 digital detectors. These standards do not define acceptance levels; ISO 10675-1:2021 may apply to certain steel, nickel or titanium welds. Available techniques are confirmed for each request.

An indicative workflow

Review the specification

Collect material, thickness, diameter, drawings, weld quantities and criteria. Identify location and scheduling constraints.

Confirm conditions

Verify resources, competence, authorizations and national requirements. Plan radiation protection arrangements with the site representatives.

Acquire and evaluate

Perform the examination under the specified conditions, verify image quality and evaluate indications.

Deliver the records

Provide agreed results and image records with identification and examination limitations.

Documentation

  • RT report identifying welds and examination conditions.
  • Interpretation results against agreed criteria.
  • Radiographs or files and retention arrangements according to the technique and contract.

Frequently asked questions

Can an RT visit be confirmed immediately?

Timing depends on feasibility, resources and radiation protection preparation. Urgent requests must be assessed before confirmation.

Will the examination use film or digital detectors?

This depends on the technical requirements and confirmed resources. The quotation specifies the chosen technique.

Is NDT certification sufficient to perform radiography?

No. Method certification, requirements for operating the equipment and regulatory authorizations are separate matters that must be checked.

LET’S DISCUSS YOUR PROJECT

Your next inspection starts here.

An equipment item. A location. A deadline. Tell us what you need.

Request a quote